ADVANCED 3D PRINTING
Dual-nozzle FDM printing in engineering polymers and carbon- and glass-filled composites, run in a heated chamber so PC, PPA-CF and PPS come off the plate stress-free. Soluble supports clear enclosed channels, and per-material shrinkage calibration keeps printed dimensions on the drawing rather than on a rendering.
SPECIFICATIONS
| MACHINE | Bambu Lab H2D dual-nozzle FDM |
|---|---|
| BUILD VOLUME | 350 x 320 x 325 mm · 300 x 320 x 325 mm dual-material |
| NOZZLES | 0.2 – 0.8 mm hardened steel, 350 °C max |
| CHAMBER | 65 °C actively heated · 120 °C bed |
| MOTION ACCURACY | 50 µm vision-assisted encoder |
| AS-PRINTED TOLERANCE | ± 0.1 mm (± 0.004″) with per-material shrinkage calibration |
| SUPPORTS | Soluble PVA and BVOH for enclosed channels |
| LEAD TIME | 3–7 days |
Materials we run
TYPICAL USE CASES
Inspection and holding fixtures
Carbon-filled nylon jigs that locate parts through EDM and marking operations.
Functional prototypes
PC and PPS-CF parts proven at temperature before committing to hard tooling.
Low-volume end-use parts
Chemically resistant PPS and ASA housings, guards and covers in small batches.
Quote within 24 hours of receiving your print. Expedite lanes ship in 3 days on qualified jobs.
RELATED CAPABILITIES
Wire EDM
Burr-free cutting of hardened and exotic alloys with no tool pressure and no heat-affected distortion.
Sinker EDM
Blind cavities, sharp internal corners and deep ribs burned into hardened tool steel.
Hole-Popping EDM
Fast small-diameter holes through anything conductive, including start holes and cooling passages.
