TIGHT TOLERANCE.
TIGHTER
TIMELINE.
Wire & Sinker EDM, hole-popping, advanced 3D printing and laser marking for aerospace, defense, medical and industrial programs.
Titanium, Inconel, hardened tool steel — held to ± 0.0001″ and shipped on schedule.
± 0.0001″ REPEATABLE / 70+ HRC CAPABLE / QTY 1 → 10,000
Ø 1.4870 +.0001 / -.0000
Ra 8 µin FINISH
FIVE PROCESSES, ONE FLOOR
Roughing to final inspection under one roof. No outside vendors in your critical path, no tolerance stack-up between shops.
Wire EDM
Burr-free cutting of hardened and exotic alloys with no tool pressure and no heat-affected distortion.
Sinker EDM
Blind cavities, sharp internal corners and deep ribs burned into hardened tool steel.
Hole-Popping EDM
Fast small-diameter holes through anything conductive, including start holes and cooling passages.
Advanced 3D Printing
Dual-nozzle FDM in engineering polymers and carbon-filled composites for fixtures, prototypes and low-volume parts.
Laser Part Marking & Engraving
Permanent UID, serialization and 2D data matrix marking that survives cleaning, heat and salt spray.
STEP FILE IN. QUOTE OUT IN 24 HOURS.
BUILT FOR THE PARTS OTHER SHOPS QUOTE AND THEN DECLINE
Hardness is not a constraint
Wire and sinker EDM cut at 70+ HRC, so your part gets heat treated before finishing instead of fighting for size after.
Five processes, no outside vendors
EDM, additive and marking happen under one roof and one quality plan. Nothing in your critical path sits on a courier.
Metrology that proves it
CMM and vision inspection with first-article reports, GD&T layouts and material certs shipped with every lot.
Expedite capacity held back on purpose
We reserve daily machine hours for rush work rather than promising three days and then backfilling the schedule.
PRINT TO PACKING SLIP
Send the print
STEP, IGES or PDF with quantity and need-by date. ITAR data accepted.
Engineering review
DFM feedback on features that will cost you money before anyone quotes.
Firm quote in 24 hrs
Price, process routing and a committed ship date — not a range.
Cut and inspect
In-process gauging with CMM first-article before the run continues.
Ship with paper
FAI report, material certs and CoC in the box. Marking done in-house.
WHERE OUR PARTS END UP
Aerospace
Structural fittings, actuation hardware and turbine details under AS9100D.
Defense
ITAR-controlled assemblies, optics mounts and ordnance components.
Medical
Instrument bodies and implant-adjacent parts with UDI marking.
Industrial
Die details, extrusion tooling and production fixtures in hardened steel.
QUESTIONS WE GET DAILY
How fast can I get a quote?
Within 24 hours of receiving a print or STEP file, guaranteed. Send quantity, material and required date and the quote comes back from the engineer who would program the job.
What tolerances can you actually hold?
± 0.0002″ is routine across sinker EDM and additive work, and ± 0.0001″ is repeatable on wire EDM. Anything tighter, we will tell you up front what the process capability is instead of quoting and hoping.
Can you cut hardened material?
Yes. Wire and sinker EDM cut at any hardness, including 70+ HRC tool steel and carbide, so parts can be hardened before finishing rather than after.
Are you AS9100 certified and ITAR registered?
AS9100D and ISO 9001:2015 certified, ITAR registered and DFARS compliant. Certificates and our quality manual are available on request.
